Power at the 1m

• Certain items can be powered on/off via network control. This is enabled for four computers: control1m, ccd1m, tycho, and newton
• The following commands are available from newton:
  • power1m on autofill (powers up autofill system, but does not fill)
  • power1m off autofill (powers down autofill system)
  • power1m on louvers (opens louvers)
  • power1m off louvers (closes louvers)
  • power1m on lights (turns on internal dome lights)
  • power1m off lights off (turns off internal dome lights)
  • power1m on motors (turns on 1m motor power). USE WITH DISCRIMINATION!
  • power1m off motors (turns off 1m motor power). USE WITH DISCRIMINATION! TURNING OFF POWER DURING OBSERVATIONS WILL LEAVE THE 1m IN A STATE THAT WILL REQUIRE INTERACTIVE RECOVERY!
• The following commands are available from tycho:
  • 1m-louvers on (opens louvers)
  • 1m-louvers off (closes louvers)
  • 1m-lights on (turns on internal dome lights)
  • 1m-lights off (turns off internal dome lights)
  • 1m-power on (turns on 1m motor power). USE WITH DISCRIMINATION!
  • 1m-power off (turns off 1m motor power). USE WITH DISCRIMINATION! TURNING OFF POWER DURING OBSERVATIONS WILL LEAVE THE 1m IN A STATE THAT WILL REQUIRE INTERACTIVE RECOVERY!